Many people think:
Pear shaped engagement rings are the most elegant choice when it comes to diamond rings.
If you’re reading this, it’s likely that you agree, right?
On this page you’ll learn how to get a beautiful pear diamond that sparkles brilliantly, while avoiding the common mistakes that many people make when buying a pear engagement ring.
Read on and you’ll learn:
- What’s good about pear engagement rings
- What’s bad about pear engagement rings, and how to avoid it
- How to find the most beautiful pear diamond
- Pear engagement ring setting styles
- Recommended diamond specs to get the most
First, a little background, so you know what you’re looking at.
Pear diamonds are a brilliant cut
Pear diamonds are a brilliant cut, which means that they are cut to maximise sparkle.
When you look on a diamond grading report, you’ll see this:
They’re actually a combination of two cuts – the round brilliant and the marquise:
What this means is that pears have been cut for each of he individual facets with the aim of sparkling as much as possible:
Pear diamonds are a ‘fancy cut’
Any diamonds that aren’t a round diamond are known as a ‘fancy cut’. And the pear is just about the fanciest of them all.
The GIA, the most widespread and most trusted of diamond assessment authorities, only issues grading cut quality reports for round diamonds.
What does this mean for you?
Any cut grades that you see on a retailer’s website are based on the retailer’s own estimation, rather than any impartial grading.
What’s good about pear diamonds?
Pear diamonds are less expensive
Pear diamonds are in less demand than other shapes.
The best thing about this?
Lower demand means lower prices.
Let’s check out the price against a round brilliant diamond:
We’re going to look at a typical price difference at one of my recommended retailers for a diamond with the following stats:
- 1 carat
- Color F
- Clarity VS1
The table below shows what this really means in terms of %:
|Shape||Price (US$)||Difference (US$)||Difference (%)|
The pear diamond is 27.3% less expensive than the round brilliant.
That’s a whole quarter!
And, while some fancy shapes offer reduced scintillation and sparkle compared to the round brilliant, a pear engagement ring will sparkle nearly as well as other brilliant shapes.
Pear diamonds look large for their carat weight
Pear diamonds can also appear larger than other shapes at the same carat weight because they have more ‘spread’.
While a 1 carat pear diamond is slightly less wide than a 1 carat round brilliant diamond, it is much longer, which gives the impression that it is larger:
Pear diamonds are flattering to the finger
Pear diamond’s elongated shapes are flattering to any finger, making them appear longer and more elegant. This is especially beneficial for people who have small hands or shorter fingers.
Pear shaped engagement rings are almosy always worn with the point facing towards the end of the finger, which can make a finger look longer and slimmer.
What’s bad about pear diamonds?
A large number of pear diamonds have an ugly ‘bow tie effect’
The biggest negative effect of pear shaped engagement rings is the same negative that affects all elongated diamond shapes, including the marquise and the oval.
The ‘bow tie’ effect.
The bow tie effect is a dark shape that appears in the center of the stone as light is reflected off the bottom of the stone and out of the sides.
This is the dreaded bow tie.
Unfortunately all pear shapes will have the bow tie effect to some extent, but it can be minimised. Find out how in the pear diamond buying guide below.
Pear diamonds show warm / yellow colors more easily
In general, white is seen as the most desirable color for diamonds. It’s the rarest and most expensive.
As you get further away from white, most diamonds tend to pick up ‘warmer’ yellow tones. Sharp points on diamonds concentrate the color, making it easier to pick up these warmer tones.
Diamonds with ‘brilliant cut’ facets are great at disguising the true colour of the stone because the light that is reflected back to your eyes is ‘chopped up’, hiding any warmer tones behind sparkle.
Pear diamonds benefit from this effect at one end only – the round end. The other end isn’t nearly so good at reflecting light back, so it’s easier to see the actual colour of the stone.
Pear shaped diamond buying guide
In this section we’re going to look at the 4 Cs for pear diamonds, plus throw in some extra information too, to make sure you get the most beautiful pear diamond possible.
- Carat weight
Plus, I’m going to talk you through the four extra Cs that you ned to
- Certification, and why it’s important
- Cost, and how you get the most value
- Choice, and why it’s especially important for pears
- Confidence, and how to be sure of your buying decision
Pear diamond cut quality guide
There are no fixed ‘ideal proportions’ for pear diamonds, which can make it difficult to find a great diamond.
But, if you know what to look for, you could find the most beautiful pear out there.
One that sparkles brilliantly that reflects as much light back to your eyes as possible.
Ideal pear diamond shape
There is a definite outline of a pear that you should be looking for.
The top lobe of the stone should be a semicircle, with no straight lines or squared off ‘shoulders’. This shape looks better, but is also more likely to reflect light back to your eyes and sparkle.
The point of the stone should be in a direct line from the center of the table and the top of the lobe.
The cutlet (bottom point) should be directly below the diamond’s top table. Again, this is much more likely to reflect light back to your eyes well.
Any deviation will mean that light is reflected in off directions and out of the side of the stone, rather than back out of the top as scintillation.
Lastly, the pointed end should not be too broad.
Some pear diamonds have too broad a tip
Some diamond cutters leave the tip at the top of the stone very broad to increase the carat weight of the diamond at the expense of the beauty of the stone:
This is often done to ensure that the pear diamond reaches a ‘magic weight’ e.g. 1 carat. However, it also makes the stone look more egg-shaped than teardrop-shaped.
Definitely not as appealing.
Some pear diamonds have overly-square shoulders
Another way some diamond cutters try and increase the carat weight of a pear shaped diamond is to have square shoulders at the bottom of the stone:
Again, this results in a less beautifully-shaped pear diamond.
Pear diamond length / width ratio should be close to 1.5
Length / width ratio is a pretty simple concept.
It’s the ratio beween the length and the width. Voila:
Although to some extent the ideal length / width ration is down to personal preference, the classic L/W ratio for pear shaped diamonds. 1.5
This basically means that stone is one and a half times as long as it is wide.
Some people prefer longer pear stones, but I’d recommend keeping it under 1:1.75 or the stone is likely to look overly long and skinny.
Equally, going below 1:1.5 means that the stone may look a little squat and dumpy.
There are also two primary characteristics you want to pay attention to when looking at proportions.
These are depth percentage and table size which are both expressed as percentages in a grading report.
Pear diamond depth percentage
Depth percentage is the depth of the diamond as a percentage of the width of the stone.
This is extremely important for pear shaped diamonds as it affects the amount of light that is reflected back off the inside of the stone and back to your eyes, but also how visible the ‘bow tie’ effect is.
Unfortunately the bow tie effect can’t be eradicated completely, but by selecting a pear diamond with a depth % in the excellent range, below, you’ll reduce the bow tie, while keeping as much sparkle as possible:
56% – 66%
54% – 72%
52% – 76%
Even when using these ratios, a visual inspection of each pear diamond is essential.
Pear diamond table percentage
Table percentage is the width of the top ‘table’ of a diamond (the flat are on top) expressed as a percentage of the total width of the stone.
Again this is an important ratio because the proportions here will affect how light is reflected within the stone and the amount that it sparkles. Look for:
54% – 64%
52% – 66%
50% – 68%
Pear diamond color recommendation
Ideally you want your diamond to look as white as possible.
But at the very top end of the color scale, it’s very difficult to see the difference between the colors. If you aren’t careful you can spend money on something that makes no difference to how the stone looks.
Because the colour of the stone can be concentrated at the pointed end of pear diamonds, I recommend going quite high on the colour scale.
Choose a G color grade for your pear shaped diamond will mean that no warmer tones are visible.
Going lower than this means that yellow tones may be visible in the stone.
Of course, you can go higher than this if you want, but the very highest colour gradings are mainly because people want to have the highest grade they can – it makes little difference to the actual appearance of the stone.
E color – very white, but very rare and therefore expensive
G color – a great mix of color and good value
I color – warmer tones clearly visible
Pear diamond clarity recommendation
Like with color, one end of the pear cut diamond is great at disguising minor inclusions, and the other is not so great at it.
So, if a pear diamond does have inclusions, then their location in the stone will make a huge difference to how visible they are.
If they’re at the round end then they may be hidden behind the sparkle and scintillation of the stone.
If they are at the point of the stone then they may be hidden by the ‘crushed ice’ effect, but this is usually less effective at hiding the inclusion.
My recommended minimum cut grade to ensure that a stone is eye clean is VS2.
Even when choosing a VS2
Pear diamond carat weight
Carat weight is something that people often get overly hung-up on. They want to choose a stone with a certain carat weight, even if it means that they end up making sacrifices on other, more important attributes of the ring.
The relationship between a diamond’s carat weight and its visible size isn’t always a direct one. When we judge a diamond’s size, we look at it from the top – known as the ‘face up’ position in the jewelry trade. However, much of the weight of a diamond is actually carried on the bottom half of the stone, where it can’t be seen.
The images below show the difference in size for pear shaped diamonds at a range of carat weights:
Hopefully you can see that increasing the carat weight doesn’t necessarily translate into a much visibly larger diamond. Changing the size from 0.8 carat to 1 carat is an increase in width of less than 0.4mm – less than 10%. However, the difference in price will be much more significant – an 80% increase.
Check out today’s prices for a 0.8 carat Pear shaped diamond on James Allen
Compare to today’s prices for a 1 carat pear diamond here
The priority that you place on diamond carat weight and how bit you want to go is totally up to you. However, my recommendation is that you definitely don’t make it the most important attribute when choosing your engagement ring. Get the setting you love, find a diamond with a great cut that is going to sparkle brilliantly, make sure that it is eye-clean and has a good color and then see what carat weight you can fit into your budget.
A well-rounded diamond with excellent sparkle will much much more impressive than a big stone with obvious flaws.
That’s to the core 4 Cs of pear-shaped diamonds:
But as mentioned earlier, there are also 4 other Cs to consider:
Pear diamond certification
The fifth C, and a very important one too. When looking at any diamond, you need to ensure that any diamond that you’re looking at is a ‘cert stone’, which means that it has been assessed, graded and coded with a laser by an independent lab.
Each certificate has a unique report number and detailed information about the stone, covering the four Cs, the height, depth and other info. As well as providing assurance that the stone that you’re buying is the quality that you are paying for, a certificate also proves what you’re buying is not a substitute.
The lab to trust and to look for certification from is the non-profit Gemological Institute of America (GIA). It’s the most internationally recognised and generally seen as the most impartial of all of the gem labs.
The reason that the GIA is so well respected is because most others labs are part of trade bodies that contain jewelry retailers, or are ‘for profit’.
While the GIA is very consistent with its gradings, the others have a reputation for being overly generous. What the GIA say is merely a diamond with a ‘good’ cut, maybe be graded ‘excellent’ by another lab, with an excellently large price to match.
Diamond certificates are what makes buying online safe and the best way to get a fantastic diamond at the lowest price. Knowing that each diamond you’re considering has been measured and graded by independent experts allows you to make an informed decision. You can take your time to consider the differences between diamonds and make sure you choose what experts have graded as the best stone, meaning that you get your perfect engagement ring at the best possible price.
Pear diamond Choice
Pear shaped diamond engagement ring Cost
Pear shaped diamond buying Confidence
Pear shaped engagement ring settings
Pear shaped engagement rings come in a wide variety of setting styles and in this section we’ll take a quick look at some of the most popular. If there’s a style that tickles your fancy, just click through to find out more, as well as see loads more options too.
Solitaire pear engagment rings are classic, simple and elegant. As well as allowing the most light to enter the center stone, meaning the diamond will sparkle as much as possible, they’re also pretty wallet-friendly, as they don’t have any fancy workmanship or extra precious stones to bump up the price.
Pear diamond solitaire rings hold the stone secure with four or five prongs around the edge of the stone and then a V-shaped prong at the bottom which holds the stone but also provides a measure of protection for the fragile point.
Pavé pear diamond engagement settings are a great way to add some extra sparkle to your engagement ring. Each of the micro diamonds that are set into the band catch the light at a slightly different time to the center stone, making the band shimmer.
Bezel settings wrap the entire edge of the stone in metal and are a great way to provide protection for your engagement ring, which is especially important on shapes like the pear where the edges are vulnerable. This bezel pear diamond engagement ring also features a pavé band to ensure that the ring still has a huge amount of sparkle.
Halo settings, which surround the stone with a ‘halo’ of smaller. This vintage-style halo pear diamond engagement ring features 0.4 carats of micro-gems in the setting, a vintage ‘millgrain’ effect (the tiny bobbles you can see around the edge of the halo and band, as well as a hidden diamond tucked into the side of the setting, underneath the main stone.
Recommended pear diamond specs
You can of course go higher than these specs, if your budget allows, but for many of the characteristics you are paying for improvements that are very difficult, if not impossible, to see by the naked eye, especially when mounted in a ring setting.
If you’re unsure about what any of these terms mean, check out this post which talks you through them all.
1.50 – 1.70
54 – 64%
56 – 66%
Get the highest quality Pear shaped diamond for the best price.
Download your free Pear shaped diamond cheat sheet
Always have the recommended specs on hand
Find the diamond that is perfect for YOU
Find the widest choice and the best value